Research Use Only
BioTeke Automated Sample Transfer Processing System, as a sample pre-processing workstation, is able to transfer 96 samples from single tubes to a 96-well plate in an automatic and accurate manner in 9-12 minutes. It integrates automatic barcode identification, decapping, liquid transfer, loading and capping of sample tubes, greatly improving large-scale nucleic acid testing capacity.
Scope of application: clinical sample processing, virus sample processing, microbiological test, nucleic acid test pre-processing, pharmaceutical development, biological sample filling, etc.
It is suitable for virus sampling tubes of multiple sizes. Up to 96 original tubes, without any pretreatment, can be loaded for four-channel barcode identification, decapping, liquid transfer, decapping. The channel spacing is flexible, fully adapting to the spacing of different plate tubes. With a collection volume of more than 10,000 samples per day, this highly automatic system can liberate researchers from heavy manual work.
The instrument covers a floor area of about 0.7 m2. Equipped with an upward-opening electric automatic door, it makes full use of the upper space of the laboratory.
Efficient Processing
With an independent four-channel decapping module and an effective transfer volume of 10-1000 μL, the automatic sample transfer processing system offers fast and accurate operation as it incorporates tedious manual sample pre-processing steps into a closed system.
Pollution Prevention
The independent HEPA filter avoids the leakage of aerosol and improves security; two built-in UV lamps and an external droplet plate offer multiple protection, to ensure stable and reliable test results.
Intelligent Automation
The four scanning modules are compatible with both QR codes and barcodes. In order to avoid missing, sample tubes will be quickly rotated, then identified and collected for information, and registered.
Portable Sesign
Portable design, fully saving laboratory space.
| Function | Sample Transfer | Work Environment | Closed sample processing |
| Application Parameters | 96 samples/9-12 min | Anti-contamination Design | External droplet plat |
| Sample Throughput | 96 samples/run | Capability | 10μL~1000μL |
| Safety Protection | UV lamp, HEPA system | Principle of Liquid Transfer | Air displacement |
| Barcode Scanning | Four 2D scanners,compatible with 1D and 2D | ||
| Robot Arm Positioning Accuracy | X-Y-Z:±0.1 mm | ||
| Sample Type | Plasma, serum, whole blood, swab wash buffer, etc. | ||
| Overall Dimension | 1300 mm (L) x 660 mm (W) x 720 mm (H) | ||
| Repeatability of Transfer | 10μL:≤5%, 100μL:≤2%,1000μL:≤1% | ||
| Information Loading | Automatic identification of sample tube barcode | ||
| Transfer Accuracy | 10μL:≤7%,100μL:≤5%,1000μL:≤2% | ||
| Tube Compatibility | Virus sampling tubes of multiple sizes,10 ml sample tubes,5 ml sample tubes (optional) | ||
NOTE:
①Sample tube opening/closing cover module
②Scanning device
③96-well sample plate
④Sample tube fixing device
⑤96 deep well plate tray
⑥Tip placement plate
⑦Consumables waste box
⑧4-channel pipetting system
⑨HEPA filtration system
⑩HEPA filtration system